Fiber Optic Patch Cord Manufacturing Machine For Central Pressure Polishing

Fiber Optic Patch Cord Manufacturing Machine For Central Pressure Polishing

Features:

1. Machinable ceramics (including extreme hardness ZrO2), quartz, glass, metal, plastic and other materials

2. Independent of rotation and revolution complex to ensure the quality of the polishing uniformity and consistency. Revolution can be stepless speed range of 15--240rpm, to meet the different requirements of the grinding process

3. Corners pressurized design, grinding time can be set freely according to the processing requirements

4. Polishing platen plane at the time of the revolution speed of 100rpm less than 0.015mm for the beating.

5. Automatically record the number of grinding, polishing can guide the operator to adjust the time according to frequency of use of abrasive paper

6. Pressure, unloading and convenient replacement of fixtures abrasive sheet

7. Processing quality and stability, low repair rate, high production efficiency (countable parallel production lines)

8. According to customer requirements increase or cancel reversing function

9. The use of polymer waterproof materials, electrical and chassis ensure waterproof seal.

10. According to customer requirements, design revolution speed digital display for milling quality control.

Maintenance

In order to keep the machine in stable and normal status, should fulfill manitenance when the machine finish operating.

1. After the machine finishes operating, or stop for certain time, must clean all polishing liquid completely, otherwise the liquid will get dry and leave hard stain, which will cause trouble for next polishing.
2. If the machine keeps no running for long time, need clean the holder in ultra-sonic cleaner, then paste rusty-proof lubrication, stored in specified tooling box.
3. The lifetime of polishing paper is varied on paper’s specification and polishing process.
4. Should inspect lubrication status of moving parts and add lubrication periodly, advice maintenance of lubrication, rusty-proof paste with NLGIZ level lubrication monthly.
5. Should inspect cooling fan, assure no stuck for dirt, clean dirt and stain over fan to keep smooth cooling system.
6. Observe belt’s tension: Open box, will be able to see belt connected to gear moter, adjust motor-locating board’s position, vary belt tension. If found polishing plate is unable to rotate evenly or skid occur, then need tension the belt, but not over-tension that bring over-load to driving structure and big noise.
7. Oberve lubrication under polishing plate, replace / add lubrication periodly.
8. Protect the polishing plate and brass-ring from contamination and impact.

polish efficency and quality

The production line will be high productivity & quality that is equiped with polishing machine and advanced no-touch fiber-interference instrument. Polishing with high quality sandpaper, strict process control through glue-removing, rough-polishing, mid-polishing to fine polishing, close surface inspection and quality monitor with fiber-interference instrument, HX-0806 helps customers achieve success.

Different central polishing jigs